TECHNICAL DATA
Material

Material basis

Material basis Powder mixture with polymers. Does not contain any asbestos or other mineral fibres.

Identification according to:

Regulation for Hazardous Goods/Road.
Regulation for Hazardous Material.

For further information refer to paragraph Safety.



Non hazardous

Irritant, contains cement

Storage

Cool and dry

Shelf life approx.

12 months

Packaging

20 kg PE lined paper bag

Material

Consumption

Approx. 1.2 kg of dry powder/m2 and mm thickness of Adhesive bed

Working temperature

+5°C to +30°C

Gauging water for:

1 kg powder
5 kg powder
20 kg powder



Up to 0.25 litre
Up to 1.25 litre
Up to 5.0 litre

Slake time

Approx. 3 minutes

Working time*

Approx. 1 hours

Curing times* (on slightly absorbent substrates):

Can be walked on after
Can be grouted after
Fully load-bearing




Approx. 3 hours
Approx. 3 hours
Approx. 1 day

Temperature resistance

-20ºC to +80ºC

Coverage

1 kg of the mixed material applied according to the instructions will cover approx.:

0.3 m² using 8mm notched trowel
0.5 m² using 6mm notched trowel
0.75 m² using 4mm notched trowel

Coverage is dependent on the application technique, substrate and the type of tiles used and these figures are therefore only a guide.

* The reverse profile of the used ceramic and the surface structure of the substrate to be covered are also important factors, besides the tile size, for the consumption of mortar. The indications refer to the installation of slightly profiled non-vitrified or vitrified tiles on render or cement screed.

** At +23°C and 50% relative humidity. Higher temperatures reduce and lower temperatures increase these times.

  



.
.